Automatic gearbox - JF403E (Stall test): Adjustments (page 2 of 2)
- Make
- Rover
- Model
- 800 Workshop Manual
- Year
- 1996–1999
- Section
- Adjustments
Automatic gearbox - JF403EStall test · page 2 of 2
- Apply foot brake, move gear selector lever to ’D’ position and note the pressure gauge reading at idle.
- Slowly press accelerator pedal to full throttle position and note pressure gauge reading. Release throttle pedal.
- Select ’N’ position on selector lever and run engine at 1200 rev/min for 1 minute, (this cools the transmission).
- Repeat operations 6 to 9 in gear selector positions ’3’ ’2’ ’1’ and ’R’ making note of each pressure reading.
| RANGE | IDLE | FULL THROTTLE |
|---|---|---|
| D,3,2,1 | 63.8 - 75.4 lbf/in2 4.3 - 5.1 bar | 187.0 - 201.5 lbf/in2 12.7 - 13.7 bar |
| R | 80.0 - 91.0 lbf/in2 5.4 - 6.2 bar | 233.4 - 245.0 lbf/in2 15.8 - 16.6 bar |
- Remove pressure gauge and adapter from
gearbox.
- Fit NEW line pressure plug and tighten to 8
Nm.
Parts & tools for this job For 1996 Rover 800
- PARTTransmission filter kitSearch: Rover 800 1996 transmission filter kit
- FLUIDAutomatic transmission fluidSearch: Rover automatic transmission fluid
- TOOLFluid transfer pumpSearch: fluid transfer pump
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.