Track rod end (page 2 of 2)
- Make
- Rover
- Model
- Coupé, Cabriolet & Tourer 200/400 Coupé, Cabriolet & Tourer Workshop Manual Supplement
- Section
- Repairs
SteeringTrack rod end · page 2 of 2
Refit
- Remove retaining tape from rotary coupler.
- Ensure road wheels are in straight ahead position and indicator cancel cam is aligned horizontally.
- Engage rotary coupler and fit steering wheel to column, ensure wheel spokes are horizontal.
- Fit NEW self-locking nut, tighten to 50 Nm.
- Connect multiplug to rotary coupler.
- Fit driver airbag module. See RESTRAINT SYSTEMS, Repairs.
Parts & tools for this job For Rover Coupé, Cabriolet & Tourer
- TOOLTie rod end toolSearch: tie rod end puller
- TOOLBall joint separatorSearch: ball joint separator
- FLUIDPower steering fluidSearch: Rover power steering fluid
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.