22 · Diagnostics

Gearbox noise - at take off

Fault diagnosisGearbox noise - at take off

GEARBOX NOISE - AT TAKE OFF

1.2 8v, 1.3 Multijet, 1.4 16v

With the engine running, there is noise at take off when the various gears are engaged: the noise changes as the speed changes.

1	REDUCTION GEAR CHECK	All OK	Problems encountered	Operation
		Test results
	Check the reduction cylinder pair Specifically: - it should not be worn or damaged; - there should not be excessive clearance; - the ring gear fastenings should not be slack.	Move on to Step 2	Reduction gear damaged	Restore the clearance or, if necessary, replace the reduction gear
2	SATELLITE CARRIER PIN CHECK	All OK	Problems encountered	Operation
	Check the wear of the satellite carrier pin or the housing in the differential casing Op. 2110D20 DIFFERENTIAL INTERNAL CASING, REMOVED - DISMANTLING AND REASSEMBLY, CHECK PLANET AND SATELLITE GEARS	End of diagnosis	Differential casing wear	Replace the differential casing Op. 2110D10 DIFFERENTIAL INTERNAL CASING - R + R WITH MANUAL GEARBOX REMOVED - INCLUDES GEARBOX DISMANTLING AND REASSEMBLY

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.