Seats creaking
- Make
- Fiat
- Model
- 500 Factory Service Manual
- Year
- 2007–2024
- Section
- Noise / vibrations › Seats creaking
SEATS CREAKING
Noise / creaking
| Test results | ||||
| 0 | PRELIMINARY CHECKS | All OK | Problems encountered | Operation |
|---|---|---|---|---|
Adjust the backrest by pressing with your hands to identify the sources of the noise coming from the backrest; dismantle the backrest. | Move on to Step 1 | Components with interference | Move the interfering parts apart. If there is interference between the backrest upholstery plastic profile and the metal parts of the backrest, shorten them | |
| 1 | CHECK ON ADJUSTMENT PLATE | All OK | Problems encountered | Operation |
| Check that the adjustment plate is not in contact with the backrest frame components. | Move on to Step 2 | Components interfering | Replace the seat frame Op. 7045A86 | |
| 2 | CHECK ON MATCHING OF UPPER AND LOWER CROSSMEMBERS WITH BACKREST SIDES | All OK | Problems encountered | Operation |
| Check the areas where the upper and lower crossmembers are matched with the backrest sides. | Move on to Step 3 | Breaks in the matching areas | Replace the seat frame. Op. 7045A86 | |
| 3 | CHECK ON WHIPLASH MECHANISM ON BACKREST | All OK | Problems encountered | Operation |
| Check for creakign caused by the whiplash mechanism on the backrest. | Move on to Step 4 | 1. Joint springs creaking 2. Contacts with backrest internal components (frame, etc.). | 1. Lubricate the joint springs with grease. 2. Space out the parts in contact. | |
| 4 | CORRECT OPERATION CHECK | All OK | Problems encountered | Operation |
| Check that the fault is no longer present. | End of diagnosis | The fault persists | Replace the seat frame. Op. 7045A86 | |
Parts & tools for this job For 2007 Fiat 500
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Fiat 500
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.