• 300Tdi Diesel Engine Overhaul  Manual - Eng
• 300 TDi Diesel Engine Overhaul Manual
• INTRODUCTION
• DESCRIPTION AND OPERATION
• OVERHAUL
• TIMING BELT, TENSIONER AND GEARS
• ROCKER SHAFT
• VALVE CLEARANCES - ADJUST
• CYLINDER HEAD
• TIMING BELT REAR COVER AND OIL PUMP
• OIL FILTER HEAD
• FUEL INJECTION PUMP
• Page 73
• FUEL LIFT PUMP
• Page 75
• FUEL INJECTORS
• GLOW PLUGS
• BRAKE SERVO VACUUM PUMP
• SUMP, OIL PICK-UP AND DRAIN PIPES
• FLYWHEEL AND STARTER RING GEAR
• DRIVE PLATE
• FLYWHEEL/DRIVE PLATE HOUSING
• Page 92
• CRANKSHAFT, CAMSHAFT, PISTONS AND CYLINDER BLOCK
• Crankshaft rear oil seal - remove
• Big-end bearings - remove
• Crankshaft and main bearings - remove
• Crankshaft - inspection
• Crankshaft - regrinding
• Main bearing caps and saddles - inspection
• Main bearing clearance - checking
• Crankshaft end-float - checking
• Big-end bearing clearance - checking
• Crankshaft, main and big-end bearings - refit
• Page 104
• Crankshaft rear oil seal - refit
• Pistons and connecting rods - remove
• Pistons and connecting rods - inspection
• Page 108
• Page 109
• Piston rings - checking
• Oil jet tubes - inspection
• Pistons and connecting rods - refit
• Oil jet tubes - refit
• Camshaft - remove
• Camshaft, bearings and cam followers - inspection
• Camshaft - refit and check end-float
• Cylinder block - inspection
• Page 118
• DATA, TORQUE & TOOLS