Control Valve - Secondary Air Injection (SAI)

Control Valve - Secondary Air Injection (SAI)

$% 17.25.02

Remove

1

2 4

3

1. Release clip and disconnect air hose from valve.
2. Disconnect vacuum hose from valve.
3. Remove 2 bolts securing valve to air manifold.
4. Remove valve and discard gasket.

Refit

1. Clean SAI control valve and mating face on manifold.
2. Fit new gasket and fit valve. Tighten bolts to 10 Nm (7 lbf.ft).
3. Connect vacuum hose.
4. Connect air hose and secure with clip.

Reservoir - Vacuum - Secondary Air Injection (SAI) - up to 03MY

$% 17.25.04

Remove

1

1

2

1. Disconnect 2 vacuum hoses from reservoir.
2. Remove bolt securing reservoir to mounting bracket and collect reservoir.

Refit

1. Position reservoir to mounting bracket and tighten bolt to 10 Nm.
2. Connect vacuum hoses to reservoir.