L322 Range Rover Service Procedures
INTERIOR FITTINGS
76-3-2
REPAIRS
Trim casing - rear quarter - lower
$% 76.13.12
Remove
1. Release 'D' post upper finisher.
Trim finisher - 'D' post - upper.
2. Remove 'D' post lower trim.
Trim finisher - 'D' post - lower.
3. Remove Allen screw securing load space
securing ring to load space floor, release and
remove securing ring assembly.
4. Release and remove seat anchor escutcheon
5. Remove access panel.
6. Release 2 turn buckles.
7. Remove 3 scrivets and release trim casing.
8. Disconnect multiplugs from interior light and
accessory power socket.
9. Remove quarter trim.
Refit
1. Position trim casing and connect multiplugs.
2. Fit scrivets and turn buckles to secure trim.
3. Fit access panel.
4. Fit seat anchor escutcheon.
5. Position luggage space securing ring to body,
locate peg. Fit and tighten bolt to 25 Nm (18
lbf.ft).
6. Fit 'D' post lower trim.
Trim finisher - 'D' post - lower.
7. Fit 'D' post upper finisher.
Trim finisher - 'D' post - upper.
M76 4530