Cover - rear seat cushion - LH

SEATS

76-5-10 REPAIRS

Cover - rear seat cushion - LH

$% 78.40.05

Remove

1. Remove LH seat base finisher.

 + 

 SEATS, REPAIRS, Finisher - seat 

base rear.

2. Remove seat fold mechanism.

 + 

 SEATS, REPAIRS, Hinge - rear seat 

- side.

3. Disconnect multiplug from squab harness.
4. Remove Torx bolt securing squab frame to seat 

frame, separate frames.

5. Release seat cover both sides and front 

beading, raise cover and cushion.

6. Release heated seat harness multiplug from 

retaining clip and feed harness through frame.

7. Remove and discard Torx bolt securing seat 

belt to seat base frame.

8. Release seat belt from seat cushion and cover.
9. Release stud and rear beading securing seat 

cover to frame, remove cover and cushion.

10. Release 11 staples securing seat cover to 

cushion.

11. Release 25 hog rings securing cover to cushion 

and remove cover.

M78 0646