Range Rover P38
ABS
9
REPAIR
BRAKE DISC AND SHIELD - FRONT
Service repair no - 70.10.12 - Front disc
Service repair no - 70.10.18 - Disc shield
Remove
1. Remove front brake pads.
See this section.
2. Remove 2 bolts securing caliper.
3. Tie caliper aside, ensuring brake hose is not
stressed.
4. Remove screw securing disc, remove disc.
5. Using a wire brush, remove corrosion from
mating faces. Clean with a suitable solvent.
6. Remove 3 bolts, remove disc shield.
Refit
7. Fit disc shield, secure with bolts. Tighten to
8 Nm. (6 lbf.ft)
8. Fit brake disc, secure with screw. Tighten to
25 Nm. (18 lbf.ft)
9. Untie brake caliper.
10. Fit brake caliper, secure with bolts. Tighten to
165 Nm. (122 lbf.ft)
11. Fit front brake pads.
See this section.