Range Rover P38
ABS
17
REPAIR
Refit
13. Fit adjuster plungers. Apply grease to cable lever
pivot pin.
14. Fit pivot pin to shoe.
15. Fit 2 bellville washers, cable lever and flat
washer. Secure with ’C’ clip.
16. Fit shoe to brake cable, align to backplate and
adjuster. Secure shoe to back plate with pin,
spring and washer.
17. Fit abutment plate to shoe.
18. Fit pull off springs with remaining shoe. Secure
shoe to backplate with pin, spring and washer.
19. Fit brake drum. Secure with screw.
20. Position propeller shaft to brake drum. Align
marks. Secure with bolts. Tighten to
48 Nm.
(35 lbf.ft)
21. Fit rear propeller shaft guard. Secure with bolts.
22. Adjust park brake.
See Adjustment.
23. Remove support from under rear wheel. Lower
lift.
PRESSURE CONSCIOUS REDUCING VALVE
(PCRV)
Service repair no - 70.25.21
Remove
1. Depressurise braking system.
See this section.
2. RHD Vehicles Only: Release coolant reservoir
from clips and bracket. Place reservoir aside for
access to PCRV.
3. Position cloth beneath PCRV to catch fluid
spillage.
4. Disconnect pipes from PCRV.