Range Rover P38
70
BRAKES
NEW RANGE ROVER
16
REPAIR
4. Mark propeller shaft flange and brake drum to
aid re-assembly.
5. Raise one rear wheel to allow rotation of
propeller shaft.
6. Remove 4 nuts securing shaft to drum. Release
shaft. Tie aside.
7. Remove screw securing drum to drive flange.
Remove drum.
8. Remove 2 washers, springs and pins retaining
brake shoes to backplate.
9. Remove brake shoe. Collect pull off springs and
abutment plate. Release remaining shoe from
brake cable.
10. Remove adjuster plungers.
11. Remove ’C’ clip securing cable lever to shoe.
Remove flat washer, lever, 2 bellville washers
and pivot pin.
12. Clean components with aerosol brake cleaner.
Allow to dry. Examine components for wear.
Replace as necessary.