Range Rover P38
70
BRAKES
NEW RANGE ROVER
18
REPAIR
5. Plug pipes and connections.
6. Remove 2 bolts securing PCRV to valance.
Remove PCRV.
Refit
7. Position PCRV to valance. Secure with bolts.
Tighten to
8 Nm. (6 lbf.ft)
8. Remove plugs from PCRV and pipes.
9. Connect pipes to PCRV. Tighten unions to
14 Nm. (10lbf.ft)
10. RHD Vehicles Only: Engage coolant reservoir
beneath bracket. Secure to clips.
11. Bleed brake system.
See this section.
PUMP AND MOTOR
Service repair no - 70.65.02
Remove
CAUTION: Whenever pump/motor
assembly is replaced, the ABS relay must
also be replaced - See Description and
Operation - Location Of Components - ABS
Illustration.
1. Disconnect battery negative lead.
2. Remove accumulator.
See this section.
3. Position cloth to catch fluid spillage.
4. Release clip securing reservoir hose to pump.
5. Disconnect reservoir hose. Plugs hose and
connection.
6. Remove banjo bolt securing high pressure hose
to pump. Collect sealing washers and discard.
Plug hose and connection.