Workshop Manuals Factory service & repair Nissan and Datsun
01 cover02 A (intro)03 B (CA18DET/ECCS)04 C (driveline)05 D (body & frame)06 E (interior electric)07 F (misc. codes)08 manual notes09 Front cover10 CONTENTS11 GI General information12 MA maintenance13 EM engine mechanical14 LC lubrication & cooling15 EF &EC engine fuel & emission control system16 FE engine control fuel & exhaust systems17 CL clutch18 MT manual transmission19 AT automatic transmission20 PD prop shaft & diff carrier21 FA front axle & suspension22 RA rear axle & suspension23 BR brake system24 ST steering25 BF body26 HA heater & aircon27 EL electrical system
Nissan and Datsun Nissan 180SX S13 1989 Workshop Manual13 · EM engine mechanical
13 · Engine

EM engine mechanical: ENGINE REMOVAL - Nissan 180SX S13 Workshop Manual

Make
Nissan and Datsun
Model
180SX Nissan 180SX S13 1989 Workshop Manual
Section
General › EM engine mechanical: ENGINE REMOVAL - Nissan 180SX S13 Workshop Manual
EM engine mechanicalEM engine mechanical: ENGINE REMOVAL - Nissan 180SX S13 Workshop Manual

EM engine mechanical: ENGINE REMOVAL

ENGINE REMOVAL

WARNING:

a. Situate vehicle on a flat and solid surface.

b. Place chocks at front and back of rear wheels.

c. Do not remove engine until exhaust system has com- pletely cooled off. Otherwise, you may burn yourself and/or fire may break out in fuel line.

d. For safety during subsequent steps, the tension of wires should be slackened against the engine.

e. Before disconnecting fuel hose, release fuel pressure from fuel line. Refer to ‘Releasing Fuel Pressure” in section EF & EC.

f. Be sure to hoist engine and transmission in a safe manner.

g. For engines not equipped with engine slingers, attach proper slingers and bolts described in PARTS CATALOG.

CAUTION: @ When lifting engine, be careful not to strike adjacent parts, especially accelerator wire casing, brake lines, and brake master cylinder. In hoisting the engine, always use engine slingers in a safe manner.

Do not loosen front engine mounting insulator cover securing nuts. When cover is removed, damper oil flows out and mount- ing insulator will not function. For tightening torque, refer to sections AT, MT and PD.

EM-32

Parts & tools for this job For Nissan 180SX

As an Amazon Associate we earn from qualifying purchases.