TIMING BELT - Nissan 180SX S13 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 180SX Nissan 180SX S13 1989 Workshop Manual
- Section
- General › TIMING BELT - Nissan 180SX S13 Workshop Manual
‹ Prev TIMING BELT - Nissan 180SX S13 Workshop ManualNext › TIMING BELT - Nissan 180SX S13 Workshop Manual
EM engine mechanicalTIMING BELT - Nissan 180SX S13 Workshop Manual
TIMING BELT
TIMING BELT
Inspection (Cont'd) [(GERRO Q\
BELT TENSIONER, IDLER PULLEY AND TENSIONER
UA Sof
‘ EWMOBy
SPRING
VST key)
1. Check belt tensioner and idler pulley for smooth turning.
» Osher
2. Check condition of tensioner spring. 7 sm
are ti —-} A i | | SEM5S178 installation
1. Confirm that No. 1 piston is set at T.D.C. on its compression stroke.
2. Install tensioner and tensioner spring. @ Turn tensioner fully clockwise with hexagon wrench, and temporarily tighten lock nut.
3. Set timing belt. Align timing marks on timing belt and sprockets.
SEM518B EM-12
‹ Prev TIMING BELT - Nissan 180SX S13 Workshop ManualNext › TIMING BELT - Nissan 180SX S13 Workshop Manual
Parts & tools for this job For Nissan 180SX
- PARTTiming belt kitSearch: Nissan 180SX timing belt kit
- TOOLEngine timing tool setSearch: Nissan engine timing tool set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
As an Amazon Associate we earn from qualifying purchases.