— Water outlet tube - Nissan 180SX S13 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 180SX Nissan 180SX S13 1989 Workshop Manual
- Section
- General › — Water outlet tube - Nissan 180SX S13 Workshop Manual
— Water outlet tube
TURBOCHARGER
Removal and Installation Turbocharger should not be disassembled.
6 21108-2 P) 12-18) Ai iniet —
$J.63-831080-0.85, 46-6.
1-5 012-45,8-19)
— Water outlet tube
kero Lock plate ds \
(For catalyzer model
P
Exava git sensor
a8 gay) ~\ & B40. 5014.1-5.1,20.37 i 2.99 at
woe ist14-15,8-10) Cos
\ Turbocharger / @z.r @" (22-30,16.221
Gosker =
(22-30, 16-22) aes ie
a: wn to i)
(1.4-15,8-99) a Exhaust outlet sems62c Drain engine coolant. Remove the following Air duct and hoses Air intake pipe eer- Exhaust front tube Oil delivery tube and return hose Water inlet and outlet tubes Remove turbocharger from exhaust manifold See When installing turbocharger to exhaust manifold, securely tighten nuts and lock the nuts with lock plate.
@ When removing or installing exhaust gas sensor, use ex- Vv 10113700 haust gas sensor wrench (KV10113700) as shown.
y SEmagsc
EM-28
Parts & tools for this job For Nissan 180SX
- PARTEngine gasket setSearch: Nissan 180SX engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
As an Amazon Associate we earn from qualifying purchases.