ADJUSTMENT (Model R180) - Nissan 200SX S12 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 200SX Nissan 200SX S12 1986 Workshop Manual
- Section
- General › ADJUSTMENT (Model R180) - Nissan 200SX S12 Workshop Manual
ADJUSTMENT (Model R180)
ADJUSTMENT (Model R180)
Side Bearing Preload (Cont'd)
10. Turn weight block a few times to ensure that 13, Calculate washer thickness following the charts bearing is properly seated. below. 11, Read dial indicator. © Normal indication:
0.10 - 0.30 mm (0.0039 - 0.0118 in} * If the needie fluctuates erratically, then bearing sither dirty or defective and should be cleaned or replaced.
| Line # ‘OPERATION | |
|---|---|
| 11 | Cott side standard number | 0.76 mm |
| 2k | Enter “A” factor (gate carr | |
| 3L_| Enter “6” factor (cliffarential case) | |
| AL__| Enter “G, " factor (loft sida bearing retainer) | |
| SL | AOD Lines 11, 2L, SL, and 4L, Enter SUM | |
| GL | Enter “DTM factor differential esse) | |
| 7 | €ncer “B tactor(iaft buaring) | |
| Bt [ADO Lines BL ana 7L. Enea SUM | |
| 9L_ | SUBTRACT Line BL from BL — Enter DIFFERENCE | |
| 10 | Enter “He factor fing | |
| 11 | eneee “H” factor’ sige | |
| PLUS SIGN + Ling 111; ADD Line 9 nd 101. | |
| Enter ditt nce on Line 12b | |
| MINUS SIGN — Line 11L: SUBTRACT | |
| Lines 101 from 9L. Enter sum on Ling 12L | |
| 12L | Lete side shim siza 7," |
srosao
12, Measure both bearings in the same way and write the left side bearing measurement next to “E” and the right side bearing measurement next to “F".
PD-48 ~
Parts & tools for this job For Nissan 200SX
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Nissan 200SX
As an Amazon Associate we earn from qualifying purchases.