ASSEMBLY (Model R200) - Nissan 200SX S12 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 200SX Nissan 200SX S12 1986 Workshop Manual
- Section
- General › ASSEMBLY (Model R200) - Nissan 200SX S12 Workshop Manual
‹ Prev ASSEMBLY (Model R200) - Nissan 200SX S12 Workshop ManualNext › ASSEMBLY (Model R200) - Nissan 200SX S12 Workshop Manual
PD - Propeller Shaft & DifferentialASSEMBLY (Model R200) - Nissan 200SX S12 Workshop Manual
ASSEMBLY (Model R200)
ASSEMBLY (Model R200)
—_____ Differential Carrier (Cont'd) — }
7. Turn drive pinion in both directions several
10. Insert left and right side bearing adjusting times, and measure pinion bearing preload.
washers in place between side bearings and
carrier.
poaeo
Tool number: $T3127S000 (See J25765-A)
11. Drive in side bearing spacer using Tool.
Pinion bearing preload:
1.13- 1,72. Nem Side bearing
(11.5 - 17.5 kg-om, 10.0 - 16.2 in-Ib)
pacer hs | Wpecifiations, replace pinion bearing adjusting 1,
Waiher and spacer with a different thickness.
*
B Select side bearing adjusting washer, .
Refer to Adjustment. 9,
Install differential case assembly with side
bearing outer races into gear carrier, sronse
Tool number: KV38100600 (J25267}
sros2?
PD-29
‹ Prev ASSEMBLY (Model R200) - Nissan 200SX S12 Workshop ManualNext › ASSEMBLY (Model R200) - Nissan 200SX S12 Workshop Manual
Parts & tools for this job For Nissan 200SX
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Nissan 200SX
As an Amazon Associate we earn from qualifying purchases.