ADJUSTMENT (Model R180) - Nissan 200SX S12 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 200SX Nissan 200SX S12 1986 Workshop Manual
- Section
- General › ADJUSTMENT (Model R180) - Nissan 200SX S12 Workshop Manual
ADJUSTMENT (Model R180)
ADJUSTMENT (Model R180)
Side Bearing Preload {Cont‘d) Follow the instructions for the sample given below:
EXAMPLE CALCULATOR
Left side Step 1. Move slide 1 to place C4 in with A3, Step 2, Move slide 2 to place D 3 in tine with G 5. Step 3, Move slide 3 to place E 16 in line with H42, Step 4. Read answer at left side arrow, 0.69 mm or close to 0,028 in.
sr
Right side Step 1, Move slide 1 to piace D 5 in line with B 4. Step 2, Move slide 2 to place O 0 in line with G 4. Step 3. Move slide 3 to place F 20 in line with H 2 (red scale for right side}, Step 4, Read answer at right side arrow, 0.67 mm ar close to 0.027 in.
14. Compare these answers with the answers on the previous page, If both answers agree, pro- ceed to the next step. 15, Select the proper washer {Refer to S.D.S.). if you cannot find the desired thickness of washer, usa washer so that thickness ir the closest to the calculated value,
PD-50
Parts & tools for this job For Nissan 200SX
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Nissan 200SX
As an Amazon Associate we earn from qualifying purchases.