DISASSEMBLY (Model R180) - Nissan 200SX S12 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 200SX Nissan 200SX S12 1986 Workshop Manual
- Section
- General › DISASSEMBLY (Model R180) - Nissan 200SX S12 Workshop Manual
DISASSEMBLY (Model R180)
DISASSEMBLY (Model R180)
Pre-inspection disassembling final drive, perform the Before Ring gear runout following inspection. 7 Check runout of ring gear with a dial indi- ¢ Total preload cator.
1) Turn drive pinion in both directions several
times to set bearing rollers. 2) Check total preload using Tool.
Runout limit:
0.05 mm (0,0020 in) Tooth contact ozs Check tooth contact, referring to Adjustment, Tool number: $T3127S000 (See J25765-A} Side gear to pinion mate gear backlash Using a thickness gauge, measure clearance be- Total preload: tween side gear thrust washer and differential
1.0-23Nm
(10 - 23 kg-cm, 8.7 - 20.0 in-Ib)
case. © Ring gear to drive pinion back lash. Check backlash of ring gear with a dial indi. cator at several points.
sr070
Clearance between side gear thrust washer and differential case: Less than 0.15 mm (0.0059 in) Ring gear-to-drive pinion backlash:
0.13-0.18mm (0.0051 - 0.0071 in}
PD-36
Parts & tools for this job For Nissan 200SX
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Nissan 200SX
As an Amazon Associate we earn from qualifying purchases.