DISASSEMBLY (Model R200) - Nissan 200SX S12 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 200SX Nissan 200SX S12 1986 Workshop Manual
- Section
- General › DISASSEMBLY (Model R200) - Nissan 200SX S12 Workshop Manual
‹ Prev DISASSEMBLY (Model R200) - Nissan 200SX S12 Workshop ManualNext › DISASSEMBLY (Model R200) - Nissan 200SX S12 Workshop Manual
PD - Propeller Shaft & DifferentialDISASSEMBLY (Model R200) - Nissan 200SX S12 Workshop Manual
DISASSEMBLY (Model R200)
DISASSEMBLY (Model R200)
Ditferential Carrier (Cont'd)
5. Loosen drive pinion nut and pull off com- 7, Remove oil seal.
8. Remove pilot bearing together with pilot panion flange. bearing spacer and front bearing inner race} using Tool.
atc. roses
6. Take out drive pinion together with rear Tool number: KV38100401{ bearing inner race, bearing spacer and ad- - } justing washer,
9. Remove side oil seal.
10. Remove pinion bearing outer races using brass drift.
ron
PD-12
‹ Prev DISASSEMBLY (Model R200) - Nissan 200SX S12 Workshop ManualNext › DISASSEMBLY (Model R200) - Nissan 200SX S12 Workshop Manual
Parts & tools for this job For Nissan 200SX
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Nissan 200SX
As an Amazon Associate we earn from qualifying purchases.