ASSEMBLY (Model R180) - Nissan 200SX S12 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 200SX Nissan 200SX S12 1986 Workshop Manual
- Section
- General › ASSEMBLY (Model R180) - Nissan 200SX S12 Workshop Manual
ASSEMBLY (Model R180)
ASSEMBLY (Model R180)
Differential Carrier {Cont‘d). 2, Select’ pinion height adjusting washer and
5. Apply multi-purpose grease to cavity at sealing. pinion bearing adjusting wesher spacer, refer- lips of oil seal. ring to Adjustment. Instalt front oi seal.
3. Install pinion height adjusting washer in drive pinion, and press fit rear bearing inner race in it, using press and Toot.
‘Tool number: ST30720000( —
6. Install companion flange, and tighten pinion © nut to specified torque. i Tool number: ST30801000{ - ) Aicartain that threaded portion of drive pinion and :
4. Set drive pinion assembly (es shown in figure inion nut ere free from oil or graase. below) in differential carrier and install drive pinion, using press and suitable tool, Stop when drive pinion touches bearing.
Powe
Toot number: $T31620000(
Drive TD
- )
Pinion bearing adusting “ae
Pinion bearing adjusting spacer
PD-64
Parts & tools for this job For Nissan 200SX
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Nissan 200SX
As an Amazon Associate we earn from qualifying purchases.