ASSEMBLY (Model R200) - Nissan 200SX S12 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 200SX Nissan 200SX S12 1986 Workshop Manual
- Section
- General › ASSEMBLY (Model R200) - Nissan 200SX S12 Workshop Manual
ASSEMBLY (Model R200)
ASSEMBLY (Model R200)
Differential Carrier (Cont'd) 2, Select pinion height adjusting washer and 5, Apply multi-purpose grease to cavity at sealing pinion bearing adjusting washer spacer, refer- lips of oil seal. ring to Adjustment. {nstall front oil seal.
3. Install pinion height adjusting washer in drive pinion, and press fit rear bearing inner race in it, using press and Toot,
Adiustng ad
Too! ja. spose i H Toot number: $T30720000( - ) FUP
6. Install companion flange, and tighten pinion nut to specified torque. Toot number: $T30901000( -— } Ascortain that threaded portion of drive pinion and
4. Set drive pinion assembly (as shown in figure pinion nut aro free from oil or grease. below) in differential carrier and instal! drive pinion, using press and suitable tool. Stop when driva pinion touches bearing.
Poets
Tool number: ST31520000( — } rive pasion — Pinion beating adjusting soacer Pinion bearing adjusting wash
\. pinion front bearing inner race AEB Front pilot bearing spacer Fron pilot bearing IES srosee
PD-28
Parts & tools for this job For Nissan 200SX
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Nissan 200SX
As an Amazon Associate we earn from qualifying purchases.