ADJUSTMENT (Model R200) - Nissan 200SX S12 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 200SX Nissan 200SX S12 1986 Workshop Manual
- Section
- General › ADJUSTMENT (Model R200) - Nissan 200SX S12 Workshop Manual
ADJUSTMENT (Model R200)
ADJUSTMENT (Model R200)
Side Bearing Preload (Cont'd) Follow the instructions for the sample given below:
EXAMPLE CALCULATOR
Left Side Step 1. Move slide 1 to place C 3 in line with an arrow. Step 2. Move slide 2 to place D3 in line with c3, Step 3. Move slide 3 to place E 18 in line with H -2. Step 4. Read answer at left side arrow, 2.28mm or close to .087 in. rosso
Right Side Step 1. Move slide 1 to place 8 3 in line with an arrow. Step 2. Move slide 2 to place G7 in line with D3. Step 3. Move slide 3 to place F 14 in line with H 2 (red scale for right side). Step 4. Read answer at right side arrow 2.14mm or closer to .086 in. srossy
14. Compare these answers with the answers on the previous page. If both answers agree, pro: ceed to the next step. 1, Select the proper washer (Refer to S.D.S.). If you eannot find the desired thickness of washer, use washer so that thickness is the closest to the calculated value.
PD-24
Parts & tools for this job For Nissan 200SX
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Nissan 200SX
As an Amazon Associate we earn from qualifying purchases.