ASSEMBLY (Model R200) - Nissan 200SX S12 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 200SX Nissan 200SX S12 1986 Workshop Manual
- Section
- General › ASSEMBLY (Model R200) - Nissan 200SX S12 Workshop Manual
ASSEMBLY (Model R200)
ASSEMBLY (Model R200)
Differential Case
Clearance between side gear thrust washer and 1, install side gears, pinion mete gears, thrust washers and thrust block into differential differential casa: Less than 0.15 mm (0.0059 in) case, 4,
Install pinion mate shaft lock pin using a‘
punch. Make sure lock pin is flush with case.
Bross2
2. Fit pinion mate shaft to differential case 40 that it meets lock pin holes,
ron |
5. Apply gear oil to gear tooth surfaces and thrust surfaces and check to see they turn properly,
rosa
3. Adjust clearance, between rear face of side gear and thrust washer by selecting side gear thrust washer (Refer to S.D.
sepa
P0028
PD-26
Parts & tools for this job For Nissan 200SX
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Nissan 200SX
As an Amazon Associate we earn from qualifying purchases.