DISASSEMBLY (Model R200) - Nissan 200SX S12 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 200SX Nissan 200SX S12 1986 Workshop Manual
- Section
- General › DISASSEMBLY (Model R200) - Nissan 200SX S12 Workshop Manual
DISASSEMBLY (Model R200)
DISASSEMBLY (Model R200)
Pre-inspection Before disassembling final drive, perform the * Ring gear runout ' following inspection. Check runout of ring gear with a dial indi. cator. © Total preload 1) Turn drive pinion in both directions several times to set bearing rollers. 2) Check total preload using Tool.
spose Runout limit:
0.05 mm (0.0020 in) Too! © Tooth contact ro2es Check tooth contact, referring to Adjustment, Tool number: ST3127S000 (See J25765-A) © Side gear to pinion mate gear backlash Total preload: Using a thickness gauge, measure clearance tween side gear thrust washer and differential
1.23 - 2.30 Nem (12.5 - 23.5 kg-em, 10.9 - 20.4 in-tb) © Ring gear to drive pinion backlash. Check backlash of ring gear with a dial indi- cator at several points.
Clearance between side gear thrust washer and differential case: Less than 0.15 mm (0.0059 in) P0813 Ring gear-to-drive pinion backlash:
0.13 - 0.18 mm (0.0051 - 0.0071 in)
PD-10
Parts & tools for this job For Nissan 200SX
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Nissan 200SX
As an Amazon Associate we earn from qualifying purchases.