Workshop Manuals Factory service & repair Rover
Rover 400 Workshop Manual (1995-2000)06 · Engine - D Series
06 · Engine

Engine RH mounting

Make
Rover
Model
400 Workshop Manual
Year
1995–2000
Section
Repairs › Engine RH mounting
Engine - D SeriesEngine RH mounting

ENGINE RH MOUNTING

Service repair no - 12.45.31

Remove

  1. Remove air cleaner. See ENGINE MANAGEMENT SYSTEM - PGMFi, Repairs.
Engine rh mounting – Remove air cleaner. See ENGINE MANAGEMENT SYSTEM - PGMFi, Repairs.
  1. Remove bolt securing engine harness clip to starter motor and move harness aside.
  2. Support gearbox on a jack.

CAUTION: Use block of wood or hard rubber pad to protect gearbox.

Engine rh mounting – Support gearbox on a jack.
  1. Remove through bolt and 2 nuts. Remove engine mounting.

Refit

  1. Fit engine mounting to studs and tighten nuts to 65 Nm.
  2. Align mounting to bracket on body and tighten through bolt to 75 Nm.
  3. Remove jack.
  4. Align harness to bracket and secure with bolt.
  5. Fit air cleaner. See ENGINE MANAGEMENT SYSTEM - PGMFi, Repairs.

Parts & tools for this job For 1995 Rover 400

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.