Workshop Manuals Factory service & repair Rover
Rover 200/400 Coupé, Cabriolet & Tourer Workshop Manual Supplement18 · Brakes
18 · Brakes

ABS hydraulic modulator (page 2 of 2)

Make
Rover
Model
Coupé, Cabriolet & Tourer 200/400 Coupé, Cabriolet & Tourer Workshop Manual Supplement
Section
Repairs
BrakesABS hydraulic modulator · page 2 of 2

Refit

  1. Fit modulator and ECU assembly to mounting bracket and tighten mounting nuts to 10 Nm.
  2. Connect brake pipe unions to modulator, ensuring pipes are connected to their correct ports.

NOTE: MC1 = Master cylinder primary. MC2 = Master cylinder secondary. RF = Right hand front. LF = Left hand front. RR = Right hand rear. LR = Left hand rear.

  1. Tighten unions to 14 Nm.
  2. Connect earth lead to modulator and fit and tighten nut.
  3. Connect multiplug to ABS ECU and secure clip.
  4. Secure ABS ECU harness to mounting bracket.
  5. Position coolant expansion tank to body and fit and tighten bolts to 5 Nm.
  6. Bleed brakes. See Adjustments.
  7. Connect battery earth lead.
  8. To ensure correct operation, the system MUST be tested using TestBook.

Parts & tools for this job For Rover Coupé, Cabriolet & Tourer

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.