seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Rear fog/backup lights > < Steering lock housing

Leon Mk1

Removing and installing clipped number plate light
Removing and installing clipped number plate light
Removing:
–  Switch off ignition and all electrical loads, and pull out ignition key.
   
–  Carefully lever out number plate light -1- from rear lid using a suitable screwdriver -arrow-.
  N94-11624
–  Release and separate connector -1- and remove number plate light -2-.
Installing:
For fitting, the operations are carried out in reverse order to the removal, taking the following into account:
  Note
t  Insert number plate light into bumper cover so that connector points to right-hand side of vehicle.
t  Engage number plate light securely in body aperture.
–  Check function of number plate light.
  N94-11625

Rear fog/backup lights > < Steering lock housing