Engine Flywheel Replacement

Make

Vauxhall

Model

Astra J

Section

Engine mechanics - 1.3L Diesel › Repair Instructions - On Vehicle › Engine Flywheel Replacement

EngineEngine Flywheel Replacement

Engine Flywheel Replacement Special Tools •  EN-470-B   Angle Torque Wrench •  EN-652   Fixing Tool For equivalent regional tools, refer to Special Tools . Removal Procedure 1. Remove the clutch pressure and driven plate. Refer to Clutch Pressure and Driven Plate Replacement . 2. Install the EN-652   fixing tool in order to fix the engine flywheel.            3. Remove and DISCARD the 8 engine flywheel bolts (2). 4. Remove the EN-652   fixing tool . 5. Remove the engine flywheel (1). Installation Procedure            1. Install the engine flywheel (1). 2. Install the EN-652   fixing tool in order to fix the engine flywheel. Caution: Refer to Fastener Caution . Caution: Refer to Torque-to-Yield Fastener Caution . 3. Install the 8 NEW engine flywheel bolts (2) and tighten in the following order:   •  Tighten the bolts to 15 N·m (11 lb ft) .   •  Tighten to an additional 35° . Use the EN-470-B   torque wrench . 4. Remove the EN-652   fixing tool . 5. Install the clutch pressure and driven plate. Refer to Clutch Pressure and Driven Plate Replacement .

11 Engine