Finishing operations
- Make
- Alfa Romeo
- Model
- GTV / Spider GTV and Spider (916) Factory Service Manual
- Year
- 1995–2000
- Section
- Fixed body components › Finishing operations
‹ Prev Positioning the spare - rear panelNext › REPLACING THE REAR FLOOR BRACKET (with rear panel removed)
70 BodyworkFinishing operations
FINISHING OPERATIONS
- Remove and level remains of welding, using a sander.
- Clean the welded areas, using a rotary brush.
PROTECTIONS
- Apply rust proofing in the areas involved by MIG welding.
- Seal the joints and carry out the rust-proofing treatments and apply the sound-deadening panels referring to the general tables given in the Manual for the areas to be treated and the products to be used.
- Proceed with painting and waxing operations.
‹ Prev Positioning the spare - rear panelNext › REPLACING THE REAR FLOOR BRACKET (with rear panel removed)
Parts & tools for this job For 1995 Alfa Romeo GTV / Spider
- TOOLTrim removal tool kitSearch: trim removal tool kit
- PARTTouch-up paintSearch: Alfa Romeo touch up paint
- PARTPanel clip assortmentSearch: Alfa Romeo panel clips assortment
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.