OVERHEAD CAMSHAFT REAR COVER - R + R AND REPLACE SEALS

Operation 1036B34 · OVERHEAD CAMSHAFT (1) IN CYLINDER HEAD (1)

1.4 16v

Removing

Op. 1048A23 COLD AIR INTAKE FOR AIR FILTER - R.R

Op. 1048A32 HOSE FROM AIR FILTER TO INTAKE MANIFOLD - R + R

Op. 1048A10 AIR FILTER ASSEMBLY - R.R.

1. Undo the nuts (1a) and place the mounting bracket (1b) for the ignition coils coupling to one side.

2. Release the electrical wiring for the ignition coils from the retainer on the rear cover.

3. Undo the fixing nuts (3a) and remove the rear cover (3b).

4. Remove the gasket.

Refitting

- Replace the gasket and place the rear cover in position.

- Fit the igntion coils mounting bracket and secure it using the nuts.

- Tighten the remaining rear cover retaining nuts.

- Secure the electrical wiring for the ignition coils to the retainer on the rear cover.

Op. 1048A10 AIR FILTER ASSEMBLY - R.R.

Op. 1048A32 HOSE FROM AIR FILTER TO INTAKE MANIFOLD - R + R

Op. 1048A23 COLD AIR INTAKE FOR AIR FILTER - R.R