HYDRAULIC TAPPET (ONE) - R.R.

Operation 1036H52 · TAPPETS AND ROCKER SHAFTS

1.3 Multijet

Removing

- Position the vehicle on the lift.

Op. 0010T20 ENGINE COOLANT - CHANGE

Op. 5530B10 BATTERY - R+R

Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R

Op. 1048A10 AIR FILTER ASSEMBLY - R.R.

Op. 1048A23 COLD AIR INTAKE FOR AIR FILTER - R.R

Op. 1044B10 FUEL FILTER ASSEMBLY - R + R OR REPLACE

Op. 1076B20 REAR EXHAUST SILENCER - R + R

Op. 1076B40 CENTRE EXHAUST PIPE - R.R.

- Follow the instructions in the procedure for all the pipes from the fuel manifold to the injector:

Op. 1060F34 PIPE FROM FUEL MANIFOLD TO INJECTOR - R.R.

Op. 1060G22 CAM ANGLE SENSOR - R.R

- Follow the instructions in the procedure for all the injectors:

Op. 1060F11 INJECTOR ONE R R

Op. 1060F52 FUEL RETURN PIPE FROM INJECTORS - R.R.

Op. 1088B10 ENGINE COOLANT SUPPLY RESERVOIR - R.R.

Op. 1008B10 POWER UNIT FRONT SUPPORT FLEXIBLE MOUNTING (TIMING SIDE) - REPLACE

Op. 1008A46 POWER UNIT RIGID SUPPORT - TIMING SIDE - R.R.

Op. 1016B10 SINGLE CAMSHAFT HOUSING - REPLACE GASKET

1. Remove the valve rockers.

2. Remove the hydraulic tappet.

Refitting

- Lubricate the hydraulic tappets with engine oil, then place them in their housings.

Position the hydraulic tappets with the oil channel hole turned toward the outside of the lower cylinder head: this position brings the hole into communication with the oil duct on the lower cylinder head.

- Fit the hydraulic tappet.

- Fit the valve rockers.

Op. 1016B10 SINGLE CAMSHAFT HOUSING - REPLACE GASKET

Op. 1008A46 POWER UNIT RIGID SUPPORT - TIMING SIDE - R.R.

Op. 1008B10 POWER UNIT FRONT SUPPORT FLEXIBLE MOUNTING (TIMING SIDE) - REPLACE

Op. 1088B10 ENGINE COOLANT SUPPLY RESERVOIR - R.R.

- Follow the instructions in the procedure for all the pipes from the fuel manifold to the injector:

Op. 1060F34 PIPE FROM FUEL MANIFOLD TO INJECTOR - R.R.

Op. 1060G22 CAM ANGLE SENSOR - R.R

- Follow the instructions in the procedure for all the injectors:

Op. 1060F11 INJECTOR ONE R R

Op. 1060F52 FUEL RETURN PIPE FROM INJECTORS - R.R.

Op. 1076B40 CENTRE EXHAUST PIPE - R.R.

Op. 1076B20 REAR EXHAUST SILENCER - R + R

Op. 1044B10 FUEL FILTER ASSEMBLY - R + R OR REPLACE

Op. 1048A23 COLD AIR INTAKE FOR AIR FILTER - R.R

Op. 1048A10 AIR FILTER ASSEMBLY - R.R.

Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R

Op. 5530B10 BATTERY - R+R

Op. 0010T20 ENGINE COOLANT - CHANGE

- Remove the vehicle from the lift.