Valve tappets - adjustment following clearance check

Make

Fiat

Model

500 Factory Service Manual

Year

2007–2024

Section

Timing system › Valve tappets - adjustment following clearance check

EngineValve tappets - adjustment following clearance check

VALVE TAPPETS - ADJUSTMENT FOLLOWING CLEARANCE CHECK

Operation 1036H18 · TAPPETS AND ROCKER SHAFTS

1.2 8v

Op. 1048A10 AIR FILTER ASSEMBLY - R.R.

Op. 1056B82 INJECTION/IGNITION SYSTEM E.C.U. (ONE) - R + R

Op. 1056B87 IGNITION/INJECTION SYSTEM CONTROL UNIT SUPPORT - R.R

Op. 5510C10 IGNITION COIL/S - R+R

Op. 1032D26 TIMING SYSTEM FRONT PROTECTIVE COVER (UPPER PART) - R.R.

Op. 1016A20 SINGLE TAPPET COVER - R.R. AND REPLACE GASKET

Op. 1036H14 VALVE TAPPETS - CHECK CLEARANCE

1. Lower the tappet in question using the tool.

Tool	Description	Function	Validity
1.860.443.000	Lever	Lower tappets	1.2 8V

2. Fit the tool for keeping the tappet lowered, then withdraw the pressure lever.

Tool	Description	Function	Validity
1.860.724.001	Lever	Lower tappets	1.2 8V

3. Remove the valve clearance adjustment plate and replace it with a one of a suitable thickness.

- Remove the tool for keeping the tappet lowered.

- Proceed in the same way for the remaining valves.

08 Engine