Code card

The Code 2 warning light is located on the instrument panel and is managed by the Code 2 ECU.

When the ignition key is turned to MAR, the warning light can signal one of the following situations:

• on briefly (0.7s) and then off: key recognised, correct system operation;
• on fixed: the ECU has detected one of the following errors:
• key not recognised by the Code 2 ECU;
• serial line between Code 2 ECU and engine control ECU not connected or no communication between ECUs;
• no keys stored (new ECU from Spare Parts Division).

The operation diagram of the warning light is summarised in the following figure:

CODE CARD

The card contains the following:

• the emergency electronic code to start the vehicle with Examiner or other diagnostic instrument or, in an emergency, with the accelerator pedal
• the mechanical code of the keys