TD5 Defender
ENGINE
19
REPAIR
70. Connect coolant hoses to fuel cooler and coolant
rail and secure clips.
71. Fit air intake hose to intake elbow and tighten
clip screw.
72. Fit starter motor. See ELECTRICAL, Repair.
73. Fit turbocharger. See FUEL SYSTEM, Repair.
74. Fit radiator. See COOLING SYSTEM, Repair.
75. Fit air filter. See FUEL SYSTEM, Repair.
76. Fill engine with oil.
77. Fit underbelly panel. See CHASSIS AND
BODY, Repair.
MOUNTING - FRONT - LH
Service repair no - 12.45.01
Remove
1. Remove centrifuge assembly. See this
Section.
2. Remove 3 bolts, remove oil filter adaptor
housing and discard gasket.
3. Fit suitable lifting chains to support engine.
4. Remove 2 nuts securing engine mounting to
chassis.
5. Remove 4 bolts securing engine mounting
bracket to cylinder block.
6. Remove nut securing mounting to mounting
bracket.
7. Remove mounting and mounting bracket.
8. Remove mounting shield.