TD5 Defender - Engine Oil Seal for Timing Cover
12
ENGINE
32
REPAIR
ROTOR - CENTRIFUGE
Service repair no - 12.60.91
Remove
1. Remove 2 bolts and remove centrifuge cover.
2. Remove and discard ’O’ ring and rotor
Refit
3. Clean centrifuge body and cover.
4. Fit new rotor.
5. Fit centrifuge cover using new ’O’ ring and
tighten bolts to 9 Nm (7 lbf.ft) .
OIL SEAL - TIMING COVER
Service repair no - 12.65.05
Remove
1. Remove crankshaft pulley. See this Section.
2. Position LRT-12-092 into crankshaft front oil seal
and discard seal.
Refit
3. Using a lint free cloth, thoroughly clean oil seal
recess and the running surface on crankshaft
pulley.
4. Position new seal into timing chain housing. Drift
seal into place using LRT-12-156 .
5. Remove LRT-12-156 .
6. Fit crankshaft pulley. See this Section.
