TD5 Defender Engine Oil Pump - Replacement Guide
12
ENGINE
24
REPAIR
STRAINER - OIL PICK-UP
Service repair no - 12.60.20
Remove
1. Remove sump gasket. See this Section.
2. Remove 3 Torx screws securing oil pick-up
strainer.
3. Remove and discard ’O’ring.
Refit
4. Clean oil pick-up strainer faces.
5. Fit new ’O’ ring to oil pick-up strainer.
6. Fit oil pick-up strainer, apply Loctite 242 to
threads of Torx screws; fit screws and tighten to
10 Nm (7 lbf.ft).
7. Fit new sump gasket. See this Section.
PUMP - OIL
Service repair no - 12.60.26
Remove
1. Remove sump gasket. See this Section.
2. Remove bolt securing oil pump sprocket to oil
pump drive spindle.
3. Remove sprocket from oil pump.
4. Remove 3 Torx screws securing oil pick-up
strainer; remove strainer.
5. Remove and discard ’O’ ring.