X,Y,Z dimensional information
- Make
- Land Rover
- Model
- Discovery II (UK)
- Section
- Body dimensions › X,Y,Z dimensional information
Chassis and body dimensionsX,Y,Z dimensional information
The 'Z' plane is an imaginery horizontal plane which measures distances in height of the vehicle. The start point for this plane is through the centre of the rear wheels.
The point to point dimensional information shown are actual distances between two points. These points used are either intersection points or holes. Where holes are taken, the point of measurement is always from the hole centre.
X,Y,Z dimensional information
Figures shown outside brackets are metric measurements (millimetres) and those inside brackets are imperial measurements (inches).
Body to chassis mounting holes
A
B C
D
E
| M77 1759 |
F G
| I.D | Description | X | Y | Z |
|---|---|---|---|---|
| A | Front mounting hole | -3071.6 (-120.929) | 419.1 (16.500) | 271.5 (10.688) |
| B | Second mounting hole | -2130.5 (-83.877) | 414.3 (16.311) | 233.4 (9.188) |
| C | Third mounting hole | -1763.7 (-69.437) | 660.4 (26.000) | 78.0 (3.070) |
| D | Fourth mounting hole | -1055.6 (-41.559) | 414.3 (16.311) | 169.8 (6.685) |
| E | Fifth mounting hole | -552.3 (-21.744) | 660.4 (26.000) | 78.0 (3.070) |
| F | Sixth mounting hole | -44.000 (-1.732) | 275.0 (10.826) | 296.4 (11.669) |
| G | Rear mounting hole | 925.6 (36.440) | 495.3 (19.500) | 184.6 (7.267) |
Parts & tools for this job For Land Rover Discovery
- TOOLTrim removal tool kitSearch: trim removal tool kit
- PARTTouch-up paintSearch: Land Rover touch up paint
- PARTPanel clip assortmentSearch: Land Rover panel clips assortment
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.