Maintenance (Testing): Procedures (page 2 of 2)
- Make
- Land Rover
- Model
- Discovery II (UK)
- Section
- Procedures
MaintenanceTesting · page 2 of 2
- Where possible, check for correct operation of hill descent control (HDC) mechanism. This should not be carried out if excessive journey time is required.
- After road/roller test, carry out a final inspection of vehicle, with vehicle on a ramp.
- Check all fluid levels and top-up if necessary.
- 2 wheel rolling road: Ensure differential lock is disengaged and propeller shaft is connected on completion of test. Switch on ignition and check that differential lock, electronic brake distribution and hill descent warning lamps are extinguished.
Parts & tools for this job For Land Rover Discovery
- PARTOil filterSearch: Land Rover Discovery oil filter
- TOOLOil filter wrenchSearch: oil filter wrench
- FLUIDEngine oilSearch: Land Rover Discovery engine oil
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.