Workshop Manuals Factory service & repair Land Rover
Land Rover Discovery II (UK)23 · Manual gearbox - R380
23 · Transmission

Gearbox - Diesel (page 3 of 4)

Make
Land Rover
Model
Discovery II (UK)
Section
Repairs
Manual gearbox - R380Gearbox - Diesel · page 3 of 4
Diagram
  1. Remove clevis pin and 'C' washer securing low 28. If fitted: ratio selector cable to lever and release cable from lever housing.
  2. Remove 2 cable ties securing cable to fuel pipes. 29. Position container to catch oil spillage
Remove 2 cable ties securing cable to fuel pipes. 29. Position container to catch oil spil
  1. Remove 2 bolts securing oil cooling pipe
  2. Disconnect 2 Lucars from oil temperature sensor and disconnect reverse lamp switch multiplug.
  3. Remove banjo bolts securing breather pipes and discard sealing washers.
  4. Remove bolt securing breather pipe 'P' clip and
  5. Using a second jack support the weight of the

release breather pipes.

release breather pipes.

Disconnect 2 Lucars from differential lock switch, release and disconnect transfer box neutral sensor multiplug. Release harness from 2 retaining clips.

Disconnect 2 Lucars from differential lock switch, release and disconnect transfer box neu

housing to gearbox, release housing and discard 'O' rings.

CAUTION: Always fit plugs to open connections to prevent contamination.

engine.

Parts & tools for this job For Land Rover Discovery

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.