Land Rover Workshop Service and Repair Manuals

INTERIOR FITTINGS

REPAIRS

76-3-5

Trim finisher - 'D' post - upper  

$% 76.13.30

Remove

1. Remove lower 'D' post finisher.

 + 

 INTERIOR FITTINGS, REPAIRS, 

Trim finisher - 'D' post - lower.

2. Remove and discard Torx bolt from lower seat 

belt anchor.

3. Release upper 'D' post finisher from seat belt 

webbing and remove finisher.

Refit

1. Pass seat belt through upper 'D' post finisher, fit 

belt and tighten Torx bolt to 50 Nm (37 lbf.ft).

2. Fit finisher.

 + 

 INTERIOR FITTINGS, REPAIRS, 

Trim finisher - 'D' post - lower.

Trim finisher - 'D' post - lower  

$% 76.13.31

Remove

1. Remove parcel tray.
2. Release rear seat squab and fold seat forward.
3. Remove sufficient 'D' post door aperture seal to 

access upper trim finisher.

4. Release 'D' post upper finisher from upper 

clips.

5. Remove 2 Torx screws securing top edge of 

lower trim finisher. Release pegs at lower edge 
and remove.

Refit

1. Fit lower trim finisher and secure with Torx 

screws.

2. Fit 'D' post upper finisher.
3. Check operation of rear seatbelt.
4. Secure seal to door aperture.
5. Position seat in upright position.
6. Fit parcel tray.