L322 Range Rover Service Procedures
PANEL REPAIRS
-36
REPAIRS
Refit
1. Fit headlining.
2. Fit all components that are removed on the sill
section of the body side panel.
, , Body side panel - sill section.
3. Connect alternator.
4. Connect battery earth lead.
'B/C' post reinforcement
In this procedure the sill and 'B/C' post section of the
body side panel is changed.
Remove
1. Disconnect battery earth lead.
2. Disconnect alternator.
3. Remove all components that are removed on
the sill and 'B/C' post section of the body side
panel.
, , Body side panel - sill and 'B/C'
Repair
1. Remove existing panel(s), prepare panel joint
faces and install new panel(s) in accordance
with Panel Replacement Procedure. Punch or
drill holes in new panel for plug welding as
shown.
If the front sill reinforcement is not being
replaced, then the 'B/C' post reinforcement
must be cut in the area identified by the saw
tooth line on the above illustration.
M77 2239
