L322 Range Rover Service Procedures
PANEL REPAIRS
REPAIRS
-43
Refit
1. Secure vehicle harness to rear body lower
closing.
2. Fit luggage space carpet.
3. Fit LH and RH rear quarter lower trim casings.
4. Fit air supply unit.
FRONT SUSPENSION, REPAIRS, Air
5. Fit both tail lamp assemblies.
6. Fit tail door lower.
7. Fit tail door aperture seal.
8. Fit rear bumper armature.
9. Fit tow bar.
10. Fit exhaust assembly.
- Td6, REPAIR, Exhaust system and
mountings.
11. Connect alternator.
12. Connect battery earth lead.
Body rear assembly
The procedure to remove the body rear lower
assembly is the same as the body rear outer panel.
Remove
1. Disconnect battery earth lead.
2. Disconnect alternator.
3. Remove body rear outer panel.
Repair
1. Remove existing panel(s), prepare panel joint
faces and install new panel(s) in accordance
with Panel Replacement Procedure. Punch or
drill holes in new panel for plug welding as
shown.
Refit
1. Fit body rear outer panel.
2. Connect alternator.
3. Connect battery earth lead.
