LR3/Disco 3
AIR SILENCER AND INLET AIR FILTER
The air silencer is required to limit any noise produced from the air supply unit during inflation or deflation of the air
springs.
The silencer comprises two plastic moulded cans, which are bonded together with a silencing foam filling the large
internal chamber which forms the exhaust silencer. A pipe connection is moulded onto each end of the silencer and
provide for the attachment of the exhaust air to atmosphere pipe and the exhaust air pipe from the air supply unit.
A secondary chamber, located around the outside of the exhaust chamber forms the silencer for the inlet air. Pipe
connections are moulded onto each end of the intake silencer and provide for the attachment of the air inlet pipe from the
inlet air filter and the air inlet pipe to the air supply unit. The intake air silencer is a hollow chamber with no noise reduction
foam filling.
The air intake filter is connected via a pipe to the intake silencer chamber of the air silencer unit. The filter is located in the
rear left hand corner of the body, away from possible sources of dirt and moisture.
The filter contains a foam element which removes particulate matter from the inlet air before it reaches the silencer or the
air supply unit.
AIR HARNESS
Item Part Number
Description
1
-
Exhaust (to atmosphere)
2
-
Inlet and exhaust silencer
3
-
Air inlet filter
4
-
Exhaust air from air supply unit
5
-
Air inlet supply to air supply unit