Range Rover P38
BMW DIESEL
25
REPAIR
9. Disconnect leak-off pipe from No. 1 injector. Plug
injector and pipe.
10. Disconnect engine coolant temperature sensor
(ECT) Sensor and temperature gauge sensor.
11. Disconnect leads from 6 glowplugs.
12. Disconnect No. 4 injector needle lift sensor.
Vehicles without EGR
13. Remove 2 bolts securing harness trunking to
cylinder head. Tie trunking aside.
14. Remove remaining bolt securing camshaft end
cover. Remove cover. Discard ’O’ ring.
NOTE: LH cover bolt also serves as
retaining pin for timing chain guide rail.
All vehicles
15. Release alternator belt tension using a suitable
lever beneath tensioner damper as shown.
Release drive belt from alternator pulley.
16. Remove bolt securing damper to drive belt
tensioner.
17. Release hoses from thermostat housing and
cylinder head.
18. Disconnect heater hose from cylinder head.
19. Remove plastic plug from flywheel timing pin
access hole. Insert timing pin LRT-12-108.