Crankshaft pulley lock bolt removal note
- Make
- Mazda
- Model
- MX-5 (NC) Factory Workshop Manual
- Year
- 2006–2008
- Section
- Mechanical › Crankshaft pulley lock bolt removal note
EngineCrankshaft pulley lock bolt removal note
Fig. 30: Exploded View Of Timing Chain Components (With Torque Specifications)
Courtesy of MAZDA MOTORS CORP.
CRANKSHAFT PULLEY LOCK BOLT REMOVAL NOTE
- Remove the cylinder block lower blind plug.
- Install the SST.
Courtesy of MAZDA MOTORS CORP.
- Turn the crankshaft clockwise until the crankshaft is in the No.1 cylinder TDC position (until the balance weight contacts the SST ).
- Hold the crankshaft pulley by using the SSTs.
Parts & tools for this job For 2006 Mazda MX-5
- PARTEngine gasket setSearch: Mazda MX-5 2006 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
As an Amazon Associate we earn from qualifying purchases.