Workshop Manuals Factory service & repair Mazda
01 General information02 Engine03 Engine performance04 Transmission05 Driveline and axles06 Suspension07 Brakes08 Steering09 Restraints10 Heating and air conditioning11 Electrical12 Accessories and equipment13 Body and cab accessories
Mazda MX-5 (NC) Factory Workshop Manual (2006-2008)02 · Engine
02 · Engine

Oil control valve (ocv) inspection [lf]

Make
Mazda
Model
MX-5 (NC) Factory Workshop Manual
Year
2006–2008
Section
Mechanical › Oil control valve (ocv) inspection [lf]
EngineOil control valve (ocv) inspection [lf]

OIL CONTROL VALVE (OCV) INSPECTION [LF]

COIL RESISTANCE INSPECTION

  1. Remove the battery cover.
  2. Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [LF] .)
  3. Disconnect the oil control valve connector.
  4. Measure the resistance between terminals A and B using an ohmmeter.

Oil control valve resistance

6.9-7.9 ohms [20°C {68°F}]

  1. Connect the oil control valve connector.
ENGINE – Mechanical – figure
Fig. 75: Oil Control Valve Connector

Parts & tools for this job For 2006 Mazda MX-5

As an Amazon Associate we earn from qualifying purchases.