Workshop Manuals Factory service & repair Mazda
01 General information02 Engine03 Engine performance04 Transmission05 Driveline and axles06 Suspension07 Brakes08 Steering09 Restraints10 Heating and air conditioning11 Electrical12 Accessories and equipment13 Body and cab accessories
Mazda MX-5 (NC) Factory Workshop Manual (2006-2008)02 · Engine
02 · Engine

Engine tune-up [lf]

Make
Mazda
Model
MX-5 (NC) Factory Workshop Manual
Year
2006–2008
Section
Mechanical › Engine tune-up [lf]
EngineEngine tune-up [lf]
ENGINE – Mechanical – figure
Fig. 77: Verifying Spool Valve Operates & Moves To Maximum Valve Timing Advance Position
Courtesy of MAZDA MOTORS CORP.

NOTE: When applying battery positive voltage between the oil control valve terminals, the connection can be either of the following:

Positive battery cable to terminal A, negative battery cable to terminal B

Positive battery cable to terminal B, negative battery cable to terminal A

  1. Stop applying battery positive voltage and verify that the spool valve returns to the maximum valve timing retard position.
    • If not as specified, replace the oil control valve.

ENGINE TUNE-UP [LF]

ENGINE TUNE-UP PREPARATION

  1. Verify the following:
    • AT: Selector lever is in P or N position.
    • MT: Shift lever is in neutral position.
  2. Verify that no DTCs are available.
  3. Warm up the engine (ECT is approx. 80°C {176°F} or more) as follows.

Parts & tools for this job For 2006 Mazda MX-5

As an Amazon Associate we earn from qualifying purchases.