Drive belt auto tensioner inspection [lf]
- Make
- Mazda
- Model
- MX-5 (NC) Factory Workshop Manual
- Year
- 2006–2008
- Section
- Mechanical › Drive belt auto tensioner inspection [lf]
EngineDrive belt auto tensioner inspection [lf] · page 1 of 2
Courtesy of MAZDA MOTORS CORP.
DRIVE BELT AUTO TENSIONER INSPECTION [LF]
- Remove the battery and battery tray. (See BATTERY REMOVAL/INSTALLATION [LF] .)
- Remove the drive belt. (See DRIVE BELT REPLACEMENT [LF] .)
NOTE: Use a mirror to see the position of the drive belt auto tensioner indicator mark.
- Verify that the drive belt auto tensioner moves smoothly in the operational direction.
- Replace the drive belt auto tensioner if necessary.
Parts & tools for this job For 2006 Mazda MX-5
- PARTEngine gasket setSearch: Mazda MX-5 2006 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
As an Amazon Associate we earn from qualifying purchases.