Workshop Manuals Factory service & repair Mazda
01 General information02 Engine03 Engine performance04 Transmission05 Driveline and axles06 Suspension07 Brakes08 Steering09 Restraints10 Heating and air conditioning11 Electrical12 Accessories and equipment13 Body and cab accessories
Mazda MX-5 (NC) Factory Workshop Manual (2006-2008)02 · Engine
02 · Engine

Drive belt replacement [lf] (page 2 of 2)

Make
Mazda
Model
MX-5 (NC) Factory Workshop Manual
Year
2006–2008
Section
Mechanical
EngineDrive belt replacement [lf] · page 2 of 2
ENGINE – Mechanical – figure
Fig. 8: Rotating Drive Belt Auto Tensioner & Removing Drive Belt
Courtesy of MAZDA MOTORS CORP.
  1. Install a new drive belt.

NOTE: Use a mirror to see the position of the drive belt auto tensioner indicator mark.

  1. Verify that the drive belt auto tensioner indicator mark does not exceed the limit. (See DRIVE BELT INSPECTION [LF] .)
    • If it exceeds the limit, replace the drive belt.
  2. Install the battery and battery tray. (See BATTERY REMOVAL/INSTALLATION [LF] .)

Parts & tools for this job For 2006 Mazda MX-5

As an Amazon Associate we earn from qualifying purchases.